How to make Recycled Hanging Jar Lanterns

Hanging Jar LampSupplies:

1.Jar (any jar with a rim will work)

2.Heavy wire (wire coat hangers are great for this)

3.Sea salt or sandM

4.Candle (suitable for jar size)Wire cutters Pliers

Hanging Jar LanternsHow to:

• Begin by measuring the amount of wire required to fit your jar of choice. To do this wrap a piece of wire around the rim of the jar, loop it up for the length of the handle and back down to the wire (see Photo Diagram 3). Leave 1 inch more of the required amount of wire and cut the wire.



• With your pliers, create a very small loop in each end of the wire (see Photo Diagram 1). Don't pinch the loop completely closed, as you will need to feed the wire through the loop a little later.



• Insert the wire through the loop (see Photo Diagram 2).

• With your pliers pinch the loop that is holding the wire tightly, to keep the wire handle from slipping out of the loop.








• Attach the other loop to wire, opposite the connection for first loop. Again, with your pliers, pinch the second loop closed.

• Slip the ring that you have formed (See Photo Diagram 2) over the rim of your jar and secure the ring in place by pulling tightly on the wire and bending the wire upward to create your handle. This is where it is very important to use a heavy wire. Lighter wires will slip and not remain secure on your jar rim.
  
  
• Now that you have created your hanger, simply pour a little sea salt or sand inside your jar, place a candle in the jar and you are all done.